7MF4435

Sitrans P DS III FF (FOUNDATION Fieldbus) Pressure Transmitter for Differential Pressure and Flow (PN 32/160)

• Extensive diagnostics and simulation functions

• Accuracy <= 0.075%

• Long-Term Stability <= 0.25% / 60 months

• Wetted parts in stainless steel 1.4571, Hastelloy, Monel, Tantal, Gold

• Measuring range 1mbar to 400bar

• Wide range of certification and approval e.g. ATEX EEx ia, EEx ib, Dust protection, FM, CS

Quantity:

£1,062.00

Image is for illustration purposes only and
may not represent the actual product

⁽¹⁾ For oxygen application, consult ABLE to add order code E10.

⁽²⁾ Not suitable for connection of remote seal. Position of top vent valve in the process flange (see dimensional drawing in specification pdf above).

⁽³⁾ Only together with max. spans 250, 1600, 5000 and 30000 mbar. (100.4, 240.9, 2008 in H₂O and 435 psi).

⁽⁴⁾ When the manufacturer's certificate M (calibration certificate) has to be ordered for transmitters with diaphragm seals, it is recommended only to order this certificate exclusively with the diaphragm seals. The measuring accuracy of the total combination is certified here.

⁽⁵⁾ When the acceptance test certificate 3.1 for transmitters with direct connected diaphragm seals is ordered, this certificate must also be ordered with the corresponding seals.

⁽⁶⁾ Without cable gland, with blanking plug.

⁽⁷⁾ With enclosed cable gland EEx ia and blanking plug.

⁽⁸⁾ Cannot be used together with the following types of protection: "Explosion-proof" or "Intrinsic Safety and Explosion-proof".