7MF4335

Sitrans P DS III FF (FOUNDATION Fieldbus) Pressure Transmitter for Absolute Pressure

• Extensive diagnostics and simulation functions

• Accuracy <= 0.075%

• Long-Term Stability <= 0.25% / 60 months

• Wetted parts in stainless steel 1.4571, Hastelloy, Monel, Tantal, Gold

• Measuring range 1mbar to 400bar

• Wide range of certification and approval e.g. ATEX EEx ia, EEx ib, Dust protection, FM, CS

Quantity:

£1,212.00

Image is for illustration purposes only and
may not represent the actual product

⁽¹⁾ For oxygen application, consult ABLE to add order code E10.

⁽²⁾ Version 7MF4334-1DY...only up to max. span 200mbar a (2.9 psi a)

⁽³⁾ When the manufacturer's certificate M (calibration certificate) has to be ordered for transmitters with diaphragm seals, it is recommended only to order this certificate exclusively with the diaphragm seals. The measuring accuracy of the total combination is certified here.

⁽⁴⁾ When the acceptance test certificate 3.1 for transmitters with direct connected diaphragm seals is ordered, this certificate must also be ordered with the corresponding seals.

⁽⁵⁾ Not for nominal measuring range 100 bar a (1450 psi a). Position of top vent valve in the process flange (see dimensional drawing in specification pdf above).

⁽⁶⁾ Without cable gland, with blanking plug.

⁽⁷⁾ With enclosed cable gland EEx ia and blanking plug.

⁽⁸⁾ Cannot be used together with the following types of protection: "Explosion-proof" or "Intrinsic Safety and Explosion-proof".

^(E) Combinations of the versions marked with E) are subject to the export regulations AL: 2B230, ECCN: N.

^(F) Subject to export regulations AL: 9I999, ECCN: N.