942-BNC

Altek 942-BNC Frequency Calibrator/Totalizer, 0 to 250 kHz, 0.001% BNC Connection

• Laboratory Accurate— ±0.001% of setting (10 PPM).

• Six Real World Ranges— 1 to 20000 Counts-Per-Hour (CPH), 0.1 to 2000.0 Counts-Per-Minute (CPM), 0.01 to 999.99 Hz, 0.001 to 99.999 kHz and 0.01 to 250.00 kHz

• Calibrate Totalizers— Output a selectable number of pulses over 1 to 99 minutes to verify totalizer readings. The calibrator automatically stops outputting when the selected number of pulses has been sent to the totalizer
• Count Pulses— Use as a timed totalizer to check flowmeter and integrator outputs. Built-in totalizer
• Save Time— Calibrate flowmeters, frequency transmitters and integrators. Use CPH and CPM ranges to d
• Match Your Receivers Input— Select from sine, zero crossing square or zero based square wave output.
• Reads All Waveforms— From 40 mV to 240V peak. Instantly recall the minimum and maximum frequency mea
• Quik-Chek Switch— In

Quantity:

£0.00 }

(Typical image for illustration purposes only)

 

Download full specification